MCSE Boot Camp Notes :

Networking Guide
Chapter 14, Printing remotely over TCP/IP
4.3BSD clients

4.3BSD clients

On 4.3BSD clients and derivatives, use the standard printing commands lpr, lprm, and lpq to do remote printing. The following options are supported when sending a print job to a remote printer attached to an SCO system on which RLP has been installed:

lpr -Pprinter_name [-#number_of_copies] [-Ttitle] [-s]

(The -s option uses symbolic links instead of copying the file to the spool directory.)

lpq -Pprinter_name
lprm -Pprinter_name
lprm -Pprinter_name job_number

Only the options listed previously are supported for the lpr, lpq, and lprm commands when used for remote printing. If unsupported options are specified, they are ignored by the print server and the print job is submitted without them.

NOTE: If the remote printer is attached to a print server running 4.3BSD or a derivative, the above restrictions do not apply. In this case, both the client and the print server are running 4.3BSD or a derivative. Remember that RLP is installed only on SCO systems.

If printing is to be done locally, all of the options that are normally available for local printing are supported.

Networking guide
Call : 800-519- 2267
MCSE CCNA Certification boot camp
Testimonials
 Join MCSE Boot Camp & CCNA Boot Camp Back to Back Certification Today.
 MCSE Boot Camp links  MCSE Boot Camp 270  MCSE Boot Camp  290  MCSE Boot Camp  291  MCSE Boot Camp 293  MCSE Boot Camp  294  MCSE Boot Camp 298  MCSE Boot Camp 299  MCSE Boot Camp Security  MCSE Boot Camp 640-801  MCSE Boot Camp routing MCSE Boot Camp 811  MCSE Boot Camp 821  MCSE Boot Camp 831  MCSE Boot Camp Resources MCSE Boot Camp MCSE + CCNA  MCSE Boot Camp Training  MCSE Boot Camp Card pay  MCSE Boot Camp Papal  MCSE Boot Camp MCSE Notes  MCSE Boot Camp CCNA Notes    MCSE Boot Camp index MCSE Boot Camp main  MCSE Boot Camp root MCSE Boot Camp link  MCSE Boot Camp resources MCSE Boot Camp home    Ref1 Ref2
Microsoft MCSE Boot Camp
MCSE Boot Camp, MCSE Certification boot camp, MCSE Training boot camps, MCSE certification  boot camp training at California and Maryland USA. Also CCNA, CCNP, CISSP, Red Hat Linux Certification notes.

 Vibrant boot camp offers MCSE, CCNA, CCNP Certification back to back

Vibrant offers MCSE certification training boot camp for $5400 all inclusive, instructor led at California and Baltimore.

Vibrant Bootcamp Participants come from All Around the World. Vibrant has trained students from more than 15 countries like USA, UK, (Scotland, Ireland, Wales), Switzerland, Germany, Australia, Canada, France, Holland, Japan, Belgium, Bahrain, New Zealand, Tanzania, Turkey, Kenya and more.

Access List Commands, Access Lists, Application Laye - OSI layer, CCNA Bootcamp Notes, CCNA certification bootcamps, CCNA T1 Connections, CDP Setup, Cisco Bootcamp, TCP/IP Info, Cisco Hierarchical Model, Cisco Notes, TCP Ports,  Configure Router Register, Configuring IPX, Configuring VLAN, Data Link Layer, DOD Model, Ethernet Frames, Ethernet Networking, Frame Relay information, HDLC WAN Notes, Host to Host Layer, IP Communication ports, IP Ports,  ISDN settings, LAN Protocols, LAN Segmentation, Lan Switiching, LAPB CCNA Notes, Layer 2 Protocol, Network Access Layer, Network Laye, Cisco Boot camps, Novell Cisco Routing, OSI Layer, OSI Model, CCNP Bootcamps, Physical Layer, OSI Layer, Point to Point Protocol, PPP, PPP Link, Presentation Layer, OSI Layer, Process Application Layer,  Rip Routing Setting, Router Images, Router Information,  Router Interfaces,  Router IOS Backup, Router IOS,  Router Management, Router Password Setup, Router Recover Password, , San Francisco, Router Setup, , California, Router troubleshoot,  Routing Protocol RIP, Session Layer, Subnet Masking, Supported RFCs, Switch Images,  Switching Configuration, Switching Simulation,  TCP/IP Ports,  VLAN Communication,  WAN Communication,