How IPX/SPX works

SCO IPX/SPX provides interoperability between DOS Workstation NetWare clients and SCO OpenServer systems over the NetWare network. It also provides the transport protocols used by SCO Gateway for NetWare to communicate with NetWare file and print servers. It eliminates the need for multiple protocol stacks in a Novell network, providing greater efficiency and lower administrative overhead. SCO IPX/SPX consists of the three components: kernel, user, and DOS.

Kernel component

This component is comprised of the following drivers:

• A STREAMS driver supporting the Novell Internetwork Packet Exchange (IPX) protocol. Depending on the capabilities of the underlying network driver, the IPX driver uses either the SCO Data Link Provider Interface (DLPI) or Link Level Interface (LLI) lower interface. In addition, IPX exposes a Transport Layer Interface (TLI) user interface with connectionless services.
  
  
  

• A STREAMS driver supporting the Novell Sequenced Packet Exchange (SPX) protocol. The SPX protocol provides connection-oriented transport services and exposes a Transport Layer Interface (TLI) user interface. SPX depends on an IPX service provider; to run SPX, you must be running IPX.
  
  
  

• A STREAMS driver supporting the Novell Virtual Terminal (NVT) protocol. NVT depends on the IPX service provider; to run NVT, you must be running IPX.
  
  

User component

This component includes the following protocols by which the SCO OpenServer system can advertise itself to NetWare clients:

• The NetWare Protocol Stack (NPS) daemon. NPSD is responsible for initializing and assembling the stack from various kernel components.
  
  

• The Novell Virtual Terminal daemon (NVTD). NVTD establishes the connection between the client and host NVT drivers and mediates the communication between them.

• The Service Advertising Protocol daemon (SAPD). SAPD advertises the services offered by a SCO IPX/SPX server. SAPD also responds to remote queries, for example, "give me the address of the nearest NVT server." Multiple SCO servers may respond to this query; it is up to the requester to pick from a set.
  

• Administrative commands and utilities.
  

DOS component

This component consists of an executable that allows a DOS client to establish a connection to the UNIX server. The NVT.EXE executable is a terminate-and-stay-resident program (TSR) and acts as a network redirector, allowing a DOS end user to establish a connection with an NVT server. For more information about installing the DOS component and using NVT.EXE, see ``Installing and using the DOS component''.

In addition to NVT.EXE, the DOS client must be running a NetWare protocol support module to provide the IPX protocol support and the device driver for the LAN card used in the DOS client machine. Currently, there are two prevalent IPX protocol modules and a terminal emulator provided by Novell:

• IPX.COM, which is generally used with NetWare 2.x and 3.x systems. There are a number of known problems with IPX.COM; its use should be avoided where possible.
  

• IPXODI.COM, which is generally used with NetWare 3.x and 4.x systems. IPXODI.COM is compatible with SCO IPX/SPX .
  

• A terminal emulator supporting the INT14 or INT6B/UB-NETCI interfaces.
  
  
  

• NetWare protocols, including packet structures and broadcast operations.

• Packet delivery, including a discussion of routers, bridges, and routing broadcasting and administration.

• Service advertising, used to advertise IPX addresses and services using the Service Advertising Protocol (SAP).

• Client-server interaction, including the files needed by a DOS workstation to access data from a server running IPX/SPX.

• The configuration files used by IPX/SPX, including those that tune IPX, SPX, and NVT.

Home Notes   Home   MCSE   MCSE + Security   CCNA   CCNP   Schedule   Register   Frequently Asked Questions   Course Fees   Contact US   Boot Camp Location   Compare us to our competitors   Testimonials   Sitemap

Testimonials

Join MCSE Boot Camp & CCNA Boot Camp Back to Back Certification Today. links  270    290    291  293    294  298  299  Security  640-801  routing 811  821   831  Resources MCSE + CCNA  Training  Card pay  Papal  MCSE Notes  CCNA Notes    index main  root link  resources home    Ref1 Ref2

Vibrant offers MCSE certification training boot camp for $5400 all inclusive, instructor led at California and Baltimore.

Vibrant Bootcamp Participants come from All Around the World. Vibrant has trained students from more than 15 countries like USA, UK, (Scotland, Ireland, Wales), Switzerland, Germany, Australia, Canada, France, Holland, Japan, Belgium, Bahrain, New Zealand, Tanzania, Turkey, Kenya and more.