gated redirect protocol statement

The redirect code is passed ICMP redirects learned by monitoring ICMP messages or via the routing stream. It processes the redirect request and decides whether to accept the redirect. If the redirect is accepted, then a route is installed in the gated routing table with the protocol redirect. Redirects are deleted from the routing table after 3 minutes.

If gated determines that a redirect is not acceptable, it tries to figure out if the kernel forwarding table has been modified. On systems where ICMP messages are monitored, this is accomplished by trying to second guess what the kernel would have done with the redirect. On systems with the routing stream, the kernel provides an indication of whether the redirect was accepted; gated ignores redirects that were not processed.

If gated has determined that the state of the kernel forwarding table has been changed, the necessary requests to the kernel are made to restore the correct state.

Note that on currently available systems it is not possible to disable the processing of ICMP redirects, even when the system is functioning as a router. To ignore the effects of redirects, gated must process each one and actively restore any changes it made to the kernel's state. Because of the mechanism's involved, there will be windows where the effects of redirects are present in the kernel.

By default, gated ignores redirects when actively participating in an interior gateway protocol (RIP or OSPF). It is not possible to enable redirects once they have been automatically disabled. Listening to RIP in nobroadcast mode does not cause redirects to be ignored nor does the use of EGP and BGP. Redirects must be manually configured off in these cases.

Note that in accordance with the latest IETF Router Requirements document, gated ensures that all ICMP net redirects are processed as host redirects. When an ICMP net redirect is accepted, gated issues the requests to the kernel to make sure that the kernel forwarding table is updated to reflect a host redirect instead of a net redirect.

The redirect statement does not prevent the system from sending redirects, only from listening to them.

   redirect yes | no | on | off
   [ {
       preference preference ;
       interface interface_list ;
       trustedgateways gateway_list ;
       traceoptions traceoptions ;
   } ] ;

preference

Sets the preference for a route learned from a redirect. The default is 30.

interface interface_list

Enables and disables redirects on an interface-by-interface basis. See ``gated interfaces statements'' for the description of the interface_list.

trustedgateways gateway_list

Defines the list of gateways from which redirects will be accepted. The gateway_list is simply a list of host names or addresses. By default, all routers on the shared network(s) are trusted to supply redirects. But if the trustedgateways clause is specified only redirects from the gateways in the list are accepted.

traceoptions traceoptions

See ``gated trace statements''.

Home Notes   Home   MCSE   MCSE + Security   CCNA   CCNP   Schedule   Register   Frequently Asked Questions   Course Fees   Contact US   Boot Camp Location   Compare us to our competitors   Testimonials   Sitemap

Testimonials

Join MCSE Boot Camp & CCNA Boot Camp Back to Back Certification Today. links  270    290    291  293    294  298  299  Security  640-801  routing 811  821   831  Resources MCSE + CCNA  Training  Card pay  Papal  MCSE Notes  CCNA Notes    index main  root link  resources home    Ref1 Ref2

Vibrant offers MCSE certification training boot camp for $5400 all inclusive, instructor led at California and Baltimore.

Vibrant Bootcamp Participants come from All Around the World. Vibrant has trained students from more than 15 countries like USA, UK, (Scotland, Ireland, Wales), Switzerland, Germany, Australia, Canada, France, Holland, Japan, Belgium, Bahrain, New Zealand, Tanzania, Turkey, Kenya and more.